Blaze King TORINO II 1606, Руководство по эксплуатации и установке

Страница: 9 / 49

OM-1606 E V1.03 April 2, 2014
Page 9
TORINO II Freestanding 1606
ASSEMBLY INSTRUCTIONS
GLASS DOOR REMOVAL
Removing the Glass Door:
1. Open the right side panel.
2. Unhook the door latch.
3. Swing the door open.
4. Using a screw driver, remove the top glass retainer, making sure to hold the glass from falling out.
5. Lift out and remove door glass with the gasket attached.
6. If the glass door is damaged, it must be replaced with another glass door certifi ed with this appliance only
7. Replacement glass doors are available through your Blaze King dealer see “REPLACEMENT PARTS” on
page 43
Replacing the Glass Door:
1. Check the condition of the glass and the gasket before installing door.
2. Replace the window glass and gasket and re-install the top glass retainer.
3. Swing the door shut and re-attached the door latch.
If the glass has been damaged contact your dealer and replace the glass and gasket with a new glass and gasket
provided by your dealer.
WARNING:
• Do not use any substitute materials for glass components.
• Do not abuse glass door such as striking or slamming shut.
• Do not operate this appliance with cracked or broken glass.
• Clean glass with a soft , non-abrasive cloth and water or a suitable, mild, non-abrasive cleaner.
• Do not use abrasive cleaners.
• Do not clean or remove glass when the appliance is hot.
WARNING:
Do not operate appliance with the glass front removed,
cracked or broken. Replacement of the glass should
be done by a licensed or qualifi ed service person.