Blaze King TORINO II 1606, Руководство по эксплуатации и установке

Страница: 39 / 49

OM-1606 E V1.03 April 2, 2014
Page 39
TORINO II Freestanding 1606
FAN REMOVAL AND INSTALLATION
To remove the fan, for maintenance or replacement, is easily accomplished by the following steps:
1. Turn off gas.
2. Disconnect electrical power to the appliance.
3. Remove the 4 screws holding the rear pedestal fan bracket to the appliance. (Fig. 21)
4. Disconnect all wires, be sure to label wires prior to disconnecting to ensure they are replaced in the
correct location.
5. Remove the 4 screws holding the fan to the rear pedestal fan bracket. (Fig. 21)
6. Installation is the reverse order of the previous steps.
Fig. 21
WARNING:
Electrical Grounding Instructions
This appliance is equipped with a
three prong (grounding) plug for
your protection against shock hazard
and should be plugged directly into
a properly grounded three prong
receptacle. Do not cut or remove the
grounding prong from this plug.
Screws for fastening fan
to bracket (4 screws)
W
Electrical Gro
This applian
three prong
your protection
and should b
a properly g
receptacle. Do
grounding p
Screws
to brac