4
www.digiop.com
SECTION 1: INSTALLATION AND SETUP
SECTION 2
Installation and Setup
2.1 What’s in the box
Your camera includes the following:
•
BLK-IPS103 camera body
•
Mounting ring
•
Cap for protecting the CCD
•
DC power adapter with power plugs for different powering sources
•
DC jack adapter cable
•
9-pin terminal block
•
Quick installation guide
•
Mounting adapter and screws for attaching the camera to a mounting bracket
•
Hex wrench
•
CD mini disk with application software and documentation
2.2 What you need
To install the camera, you will need:
•
Phillips #1 or #0 screwdriver
•
Mounting bracket
•
PC with Microsoft
®
Windows
®
XP with SP3 or newer, 32- or 64-bit system
•
Compatible lens
CAUTION
If using this camera with a high-zoom lens in an environment where the temperature changes more than ±18
˚
F, optical
blur may occur. For installation with a high-zoom lens, choose an environment where the temperature is stable.
2.3 Mount the camera
1.
Determine where the camera will be mounted and record the Media Access Control (MAC) address of the camera. The MAC
address can be found on label on the bottom of the camera. Record the information in the following table.
Location:
MAC address: