10
www.digiop.com
SECTION 2: INSTALLATION AND SETUP
2.4.6 LAN and power connections
Your camera can be powered locally with a 12 V DC adapter or with Power over Ethernet (PoE, see Appendix B). If you are using PoE,
you do not need to attach a power adapter to the camera.
1.
Attach a LAN cable to the Ethernet connector on the back of the camera. If your camera will be powered through the LAN
cable,
DO NOT apply power
to your camera at this time.
2.
Attach the DC jack adapter cable to the DC 12V power adapter terminals on the back of the camera. Connect the red wire of
the adapter cable to the + terminal, and the black (or white) wire to the
-
terminal.
DC jack
adapter
cable
3.
Attach the power plug appropriate for your powering source to the power adapter.
4.
Attach the DC jack Adapter to the DC power adapter provided.
DO NOT apply power
to your camera at this time.
2.5 Install IPAdmin Tool
The IPAdmin Tool, included on the CD mini disk, is a utility that will discover cameras installed on your network and enable you
to perform the initial network setup for each camera. After a camera is setup on the network, the Microsoft Internet Explorer
®
web browser can be used to see video from the camera, set the camera’s password, date and time, finalize camera hardware
adjustments, and configure the camera for functional requirements.
