53
12x PTZ Outdoor Camera User Manual
SECTION 4: USING THE OSD MENUS
4.10.3 Configuring auxiliary alarm output
An auxiliary output is a configurable alarm output interface on the camera back box which can connect and trigger another alarm
device to operate. You can configure two auxiliary outputs.
1.
Open the alarm auxiliary output configuration submenu (AUX). Go to
MAIN MENUS
g
DOME SETTINGS
g
AUX
Configure AUX output
2.
Click
IRIS+
to edit the status of the auxiliary outputs. You can set the alarm output type as OPEN (normally open) and CLOSE
(normally closed).
3.
Move the cursor to
DWELL TIME
to set the duration of the auxiliary output signal. The configurable rage is 0~60 seconds.
4.
Link the auxiliary output to the configured alarm.
a.
Open
MAIN MENUS
g
DOME SETTINGS
g
ALARMS
g
ALARM SETTING
, then choose the alarm number that
you want to link the auxiliary output to.
b.
Move the cursor to
AUX
, then click
IRIS+
to configure the auxiliary output to the alarm. You can choose NONE to
disable auxiliary alarm outputs, choose 1 to active AUX 1, or choose 2 to active AUX 2.
4.11 Others
4.11.1 Line Synchronization
Line synchronization is used to choose the way the line is synchronized. If the LINE LOCK parameter is OFF, the synchronization
mode is internal synchronization. When the LINE LOCK as ON, the synchronization mode is external synchronization.
NOTE
: This
camera does not currently support external synchronization.
