42
SECTION 4: USING THE OSD MENUS
4.5.2 TASK 2: Clear the preset settings
To clear the preset setting, move the cursor to
CLEAR PRESET
, then click
IRIS+
to clear the settings of the preset.
4.5.3 TASK 3: Call the presets
Through a web browser connected to your DVR, select the preset number from the preset list in the control panel of the DVR, then
click the icon to call the preset.
4.6 Configuring Patrols
A patrol is a memorized series of preset function. It can be set and previewed on the patrol settings interface.
4.6.1 TASK 1: Set a patrol
You can configure up to 8 patrol numbers.
1.
Open the patrol configuration submenu. Go to
MAIN MENUS
g
DOME SETTINGS
g
PATROLS
2.
Choose the patrol number:
a.
Move the cursor to
PATROLS NUM
and click
IRIS+
to enter edit mode.
b.
Click the up and down direction buttons to select the number of the patrol which is to be configured.
c.
Click
IRIS+
again to confirm and exit edit mode of this column.
Patrol configuration menu
