44
SECTION 4: USING THE OSD MENUS
4.6.4 TASK 4: Call the defined patrol
To call a patrol, use a web browser connected to your DVR to select the corresponding preset number from the drop-down list in
the control panel, then click the icon to call the related patrol. For example, you might call preset 35 to call patrol 1. Refer to “3.2
System-defined Presets” on page 22 to find the preset number for a patrol.
4.7 Configuring Patterns
A pattern is a memorized, repeatable series of panning, tilting, zooming and preset movements that can be recalled by a command
or automatically performed by a configured function (alarm, park, time task, and power-up).
Patterns configuration menu
4.7.1 TASK 1: Set a pattern
You can configure up to 4 patterns. To set a pattern:
1.
Open the PATTERNS submenu. Go to
MAIN MENUS
g
DOME SETTINGS
g
PATTERNS
2.
Choose the pattern number:
a.
Move the cursor to
PATTERN NUM
and click
IRIS+
to open the menu in edit mode.
b.
Click the up and down direction buttons to select the number of the pattern you want to configure.
c.
Click
IRIS+
again to confirm.
3.
Edit the pattern.
a.
Move the cursor to
EDIT PATTERN
and click
IRIS+
to enter edit mode.
