38
SECTION 4: USING THE OSD MENUS
4.
Click
IRIS+
button to confirm.
NOTE
If you enable both ZOOM and PT OSD while calling a preset, the preset label will be displayed until the preset finishes.
Display the viewing direction
The camera displays a viewing direction code when you manually rotate the camera. Codes are shown in the table below.
Display
N
NE
E
SE
S
SW
W
NW
Indication*
North
Northeast
East
Southeast
South
Southwest
West
Northwest
* The north direction refers to the 0º angle (initial position).
4.4 Configuring PTZ control parameters
You can configure panning, tilting and zooming movements, and configure PTZ control functions including presets, patrols,
patterns, etc. for the camera.
4.4.1 Configuring PTZ parameters
Open the PTZ configuration menu. Go to
MAIN MENUS
g
DOME SETTINGS
g
MOTION PARAMETER
PTZ configuration menus
Descriptions of PTZ parameter configuration:
•
Auto-flip
. In manual tracking mode, when a target object moves directly beneath the camera, the camera automatically
rotates 90 degrees horizontally (flips) for tracking. The default setting of AUTO-FLIP is ON for this camera model.
