46
SECTION 4: USING THE OSD MENUS
4.7.4 TASK 4: Call the defined pattern.
You can select the corresponding preset number from the drop-down preset list in the control panel of the DVR through a web
browser, and click the arrow to call the related pattern. For example, call preset 41 to call pattern 1. Refer to “3.2 System-defined
Presets” on page 22 to find the corresponding preset number for each pattern.
4.8 Configuring Time Tasks
A time task is a scheduled camera action configured to perform automatically at the specific time.
4.8.1 TASK 1: Set time tasks
You can configure up to 8 tasks. To configure a time task:
1.
Open the
TIME TASK
submenu: Go to
MAIN MENUS
g
DOME SETTINGS
g
TIME TASK
Time Task configuration menu
2.
Choose the task number.
a.
Move the cursor to
TASK NUM
and click
IRIS+
to enter edit mode.
b.
Click the up and down direction buttons to select the task number you want to configure.
c.
Click
IRIS+
again to confirm and exit edit mode of this column.
3.
Set the task status.
a.
Move the cursor to
TASK STATE
and click
IRIS+
to enter edit mode.
