41
12x PTZ Outdoor Camera User Manual
SECTION 4: USING THE OSD MENUS
Edit the Preset Label (1)
a.
Move the cursor to
EDIT LABEL
and click
IRIS+
to enter the edit mode.
b.
Click
FOCUS+
in the PTZ control panel to switch between different character lists: capital alphabet, lowercase
alphabet, symbols and numbers. Click the up/down and left/right direction buttons to move the cursor to choose a a
character to input.
c.
Click
FOCUS-
to position the cursor on the label where the character needs to be modified. Click
ZOOM IN
to delete it.
d.
Click
IRIS+
to enter the selected character from the list into the label.
e.
Click
FOCUS+
to exit the character lists and click
IRIS+
again to confirm and close the submenu.
Edit the Preset Labe (2)
4.
Set the preset position.
a.
Move the cursor to PRESET PTZ and click
IRIS+
to edit the preset position.
b.
Use the direction buttons to move the camera to find the desired scene/position, and then press
IRIS+
to confirm the
settings and return to the previous menu, or press
IRIS-
to cancel.
NOTE
The preset position settings are restricted by limit stops if they are defined.
