19
High Performance IR CCTV Bullet Camera User Manual
SECTION 3: SOFTWARE SETUP
DIS
(Digital Image Stabilizer): The DIS feature attempts to compensate for the ghosting in a low light conditions to produce
a clearer image.
DIS off
DIS on
NEG. IMAGE
: Set this option to ON to show a color-reversed or black and white-reversed image.
RETURN
: On the D-EFFECT menu, select RETURN to return to the SPECIAL menu.
MOTION
: The MOTION feature allows you to quickly identify areas of the image where motion is detected. Set MOTION to ON
then press the joystick in to open the MOTION sub-menu. You can configure up to four motion detect areas on the image.
AREA:
Move the cursor to AREA, then rock the joystick right or left to select 1, 2, 3, or 4. The area selected will blink in the
background.
AREA DISPLAY
: Move the cursor to AREA DISPLAY, then rock the joystick right or left to select ON to configure that
area, or OFF to disable that area. If ON, push the joystick in to open the submenu for the area selected:
—
In the POSITION display, rock the joystick left, right, up and/or down to move the block (detection area) to the region
of the display you want to monitor, then press the joystick in to select that position and move to the SIZE display.
—
In the SIZE display, rock the joystick right or left to expand or contract the area horizontally. Rock the joystick down or
up to expand or contract the area vertically. Press the joystick in twice to return to the MOTION submenu.
—
Move the cursor to SENSITIVITY, then rock the joystick left or right to adjust the motion detection sensitivity for
objects in you want the camera to detect in that area.
Repeat this procedure to configure or disable the other motion detection zones.
