9
High Performance IR CCTV Bullet Camera User Manual
SECTION 3: SOFTWARE SETUP
MODE
: Rock the joystick down to highlight MODE. Rock the joystick left or right do display INDOOR or OUTDOOR (installation
environment).
RETURN
: To return to the SETUP menu and save your brightness and mode settings, rock the joystick down to highlight RETURN,
then press it in to select return.
3.2 EXPOSURE
To open the EXPOSURE submenu, highlight EXPOSURE, then press the joy stick in. The EXPOSURE sub-menu will open.
SHUTTER
: This function is used to select automatic (AUTO) shutter speed control, or set the shutter speed manually. SHUTTER
speed can between 1/60 sec and 1/100,000 sec.
AGC
(AUTOMATIC GAIN CONTROL): Higher gain increases brightness but also increases any noise. When a high gain level is
applied, higher noise levels are seen.
OFF
: AGC not active.
AUTO
: AGC level is determined by the camera.
LOW
: Sets gain to 28 dB.
MIDDLE
: Sets gain to 32 dB.
HIGH
: Sets gain to 36 dB.
SENSE-UP:
The SENSE-UP feature is used to sense the degree of darkness in low light or dark conditions and improve image
brightness accordingly.
OFF
: SENSE-UP not active.
AUTO
: SENSE-UP is active. SENSE-UP level is determined by settings in the submenu.
