14
SECTION 3: SOFTWARE SETUP
EXT
: This feature is not used in these cameras.
B/W
: The picture is displayed in black and white only. When B/W is used, WHITE BAL is disabled. Selecting this option opens the
B/W sub-menu.
BURST
: Burst ON sends a color signal to the monitor in B/W mode. This signal does degrade the clarity of the image from
the camera. Some DVRs require a color burst signal to detect the camera.
IR SMART
: This option controls the IR LED output level to compensate for object distance. IR SMART is applied to objects
in a specified area of the image.
IR SMART off
IR SMART on
Selecting IR SMART ON opens the IR SMART sub-menu where you can set the IR gain and position and size of the target area.
VALUE
: With the cursor pointing to GAIN, rock the joystick right or left to increase or decrease the IR level. The
default value is 50.
AREA
: Select AREA to enter a graphical sub-menu for defining the position and size of the part of the image where
IR SMART is applied.
—
In the POSITION window, rock the joystick up, down, left and/or right to position the upper-left corner of the IR
SMART area, then push the joystick in to confirm your selection and enter the SIZE graphical submenu.
