Black Box VSW-HDMI2X2-4K, Руководство пользователя

Страница: 19 / 32

724-746-5500 | blackbox.com
Page 19
Chapter 4: Operation
4.2.3 EQ Adjustment
EDID Copy button
Figure 4-3. EQ Adjustment switch on the units.
Press the BTNB and EDID Copy buttons for 3 seconds and release right after the (left) LED L1–L4 flash red. (LED L1–L4 indicates
which level is on). Then press BTNA to decrease one level or press BTNB to increase one level. (8 levels: GREEN: level 1–4, RED:
level 5–8). Press the EDID Copy button once to exit the setting.
Figure 4-4. EQ adjustment steps.
4.2.4 Factory Default Setting
If you have problems with the unit’s settings, reset it to the factory default. To return all settings to the factory default, press the
BTNB and EDID Copy buttons for 9 seconds, and release right after four LEDs (L1–L4) flash green twice.
NOTE: After reseting to factory default, the system will select source 1 to start displaying. When the system is in Priority or Auto
Mode, refer to Figure 2-8 and Table 2-4, Advanced Auto-sensing Setting switch and functions.
Figure 4-3. User control functions.