Black Box VSW-HDMI2X2-4K, Руководство пользователя

Страница: 17 / 32

724-746-5500 | blackbox.com
Page 17
Chapter 4: Operation
4.2.2 EDID Setting
NOTE: Before starting, slide the Audio/Video EDID Setting Switch to position 2/3/4.
EDID Setting switch
Figure 4-3. EDID Setting switch on back panel of Matrix Switch.
Copy Monitor EDID (2 methods):
Method 1
Step 1: Apply power to the unit.
Step 2:
Connect the (EDID compliant) monitor to the output port of the unit and power on the monitor.
Step 3:
Press and hold the button “EDID COPY” for 3–5 sec. and release the button RIGHT AFTER the LED L1–L4 (4 x 2 switch)/
LED L1 and L2 (2 x 2 switch) flash GREEN and RED.
Result: If the LED S1–S4 (4 x 2 switch)/ LED S1 and S2 (2 x 2 switch) return to normal status, it indicates that the EDID Copy is
completed.
Method 2
NOTE: Before starting, power off the unit and connect monitor to the output port of the unit.
Step 1: Press and hold the button “EDID COPY.”
Step 2: Apply power to the unit.
Step 3:
Release right after the LED L1–L4 (4 x 2 switch) LED L1 and L2 (2 x 2 switch) flash GREEN & RED. (3–4 seconds).
Result:
If the LED L1–L4 (4 x 2 switch)/ LED L1 and L2 (2 x 2 switch) return to normal status, it indicates that the EDID Copy is
completed.
Otherwise, the LED flashes RED, indicating that:
a. The monitor is not properly connected.
b. The monitor is not powered on.
c. EDID data of the monitor is not applicable.