Black Box VSW-HDMI2X2-4K, Руководство пользователя

Страница: 22 / 32

724-746-5500 | blackbox.com
Page 22
5.2 GUI over Serial
The switch-splitter allows users to control the unit by GUI operation via a built-in serial interface. Follow the installation and
operation steps described next.
1. Installing Application
A serial console (PC) running Windows 98/2000/X/Vista/7 is required to install the appropriate software. Follow the step-by-step
instructions listed below.
All prompt screens and dialog boxes shown in this section are for Windows XP and above. Some dialog boxes and folders may
slightly different in other versions of Windows.
• Install the "AV Console Center” application (Windows 98 and above)
a. Insert the CD into the CD/DVD-ROM drive and the Web browser opens.
b. Copy the file “AV Console” to your PC or any hard disk. Do not run the app directly on the CD.
2. Uninstalling Application
To uninstall the application, you can manually delete the file "AV Console” from the Windows platform.
3. Description and Operation
The Graphical User Interface (GUI) is designed for user-friendly operation. The application is divided into two parts—Basic
Operation and Advanced Operation. For more information, refer to the following descriptions:
5.2.1 Basic Operation
1. GUI Connection
After software installation, connect the serial cable to serial port of the Switch-Splitter. Connect the other end to the serial port
(COM1, COM2…) of your computer. Next, click “TuApp.exe” on the file “AV Console” to start GUI operation.
If it’s your first time running this GUI utility without previously saving a device file, the window shown below will pop up.
Figure 5-2. OK prompt.
Click “OK” to continue.
Chapter 5: Serial Configuration