Black Box ServSwitch Octet KV1700, Руководство пользователя

Страница: 41 / 80

CHAPTER 4: BASIC OPERATIONS
39
CHAPTER
4
4. Basic Operations
4.1 Power Up and LEDs
Octet switch
There are three groups of LEDs on the front panel of your Octet KV170x switch. Each
green LED in the left group corresponds to a server port. Each LED illuminates when the
system or cascaded Octet switch is attached and powered up.
Figure 4-1. Octet Switch LEDs (Ocet KV1702 Switch Shown)
In the center group, the green LAN LINK LED illuminates when a valid
connection is made to the network port of the Octet switch. The amber LAN
100M LED indicates the speed of the attached LAN. This LED illuminates when
a 100Mb connection is made or remains unlit when a 10Mb connection is made.
The green/amber
PWR LED is amber when the Octet switch is powered up and
green when the Octet switch is operating.
Additional green LEDs in the right group correspond to each user port and illuminate
when the Octet KV1711, Octet KV1712 or Octet KV1713 user station or cascaded (Octet
KV1700, Octet KV1701, or Octet KV1702) switch is attached and powered up.
There are two blue LEDs on the front panel of the Octet user station. The top LED is the
power status LED and remains constantly lit when power is connected and off when
power is absent. The lower LED shows connection and activity status. This LED blinks
when the OSD is displayed and remains constant when there is a valid connection between
the Octet user station and an Octet SAM or Octet switch.
The rear panel of the Octet KV1711. Octet KV1712 and Octet KV1713 user stations
provide two LEDs, one green and one yellow, mounted on each UTP port connector. The
green LEDs indicate the connection status of each port. The yellow LEDs indicate the
activity status of each port. The rear panel UTP port LEDs are described in the
following table.