Black Box ServSwitch Octet KV1700, Руководство пользователя

Страница: 65 / 80

CHAPTER 5: ADVANCED OPERATIONS
63
3. Type
fd ‘[TargetUserStationName]’
and press
Enter
to force the target user
station to disconnect from the connected server.
NOTE:
The TargetUserStationName is shown in the Octet OSD ? tab of the target user station. After selecting the
? tab, press the
End
key to view the unit name at the bottom of the tab. This unit name can be set in the
Octoware. The servername is the name of the Octet SAM and should be entered exactly as it displays in
the target list. Single quotes are required before and after the TargetUserStationName and the servername.
The following is an example of a force connection command: fc ‘User Station 3’ ‘Server 43’.
To configure the DDC table:
1. Press the default Command Line hotkey sequence to display the Command Line.
2. Type ddctable ‘[servername]’ default and press Enter to set the Octet SAM
with the specified servername to use the default DDC table.
3. Type
ddctable ‘[servername]’ nVidia
and press
Enter
to set the Octet SAM with
the specified servername to use the nVidia DDC table.
NOTE:
The servername is the name of the Octet SAM and should be entered exactly as it displays in the target list.
Single quotes are required before and after the servername. The following is an example of the command
for a typical configuration DDC table: ddctable ‘Server 43’ nVidia.
To set persistent mode:
1. Press the default Command Line hotkey sequence to display the Command Line.
2. Type
enable persistent mode
and press
Enter
to store the UID and connection
type of
a server.
- or -
Type
disable persistent mode
and press
Enter
to disable the persistent mode
setting.
NOTE: The persistent mode setting enables a user station to use stored UID and connection
type values to re-establish a lost connection.
To view persistent mode:
1. Press the default Command Line hotkey sequence to display the Command
Line.
2. Type
show persistent mode
and press
Enter
to display the current
persistent mode setting. If the persistent mode is enabled, the current stored
UID and connection type settings are
also displayed.