Black Box ServSwitch Octet KV1700, Руководство пользователя

Страница: 42 / 80

SERVSWITCH
TM
OCTET INSTALLER/USER GUIDE
40
Octet SAM
The Octet SAM features two green LEDs:
Power
and
Link/ACT
.
These indicators
show that the attached computer is powered and a valid UTP connection has been
made to an Octet switch. The
Link/ACT LEDs blink while the module is being
upgraded or when a fault has been detected on the ALI ports.
SAMDM module
The SAMDM modules feature three green LEDs: one Power and two Link LEDs, one for
each ALI port. These indicators show that the attached computer is powered and a valid
UTP connection has been made to an Octet switch. The
Link
LEDs blink while the
module is being upgraded or when a fault has been detected on the ALI ports.
Octet Serial SAM
The Serial SAM features two green LEDs: Power and Selected. When illuminated, Power
indicates that the module has power. Selected indicates that a valid UTP connection has
been made to an Octet switch. The serial will not generate a serial break to the attached
device in the event that the Serial SAM loses power.
4.2 OSD Overview
The Octet user station uses the Black Box OSD, featuring intuitive menus to configure
your system and select devices. The OSD is easily accessed and always available at
the desktop.
The OSD consists of five main tabs: Target, User, Console, Admin and ?. The arrow
buttons provide easy navigation through the OSD subscreens, as described in the
following table.
User Station Rear Panel LEDs
Green Yellow Activity
On Blinking
Link Connection Active;
Data Transfer in Progress
Off Off Link Connection Inactive
OSD Navigation Buttons
OSD Navigation Buttons Action
Displays the top subscreen in the hierarchy
Displays the previous subscreen in the hierarchy
Displays the next subscreen in the hierarchy