Black Box ServSwitch DTX5000, Руководство пользователя

Страница: 44 / 98

SERVSWITCH DTX 5000/5001/5002 USER GUIDE
32
To connect power to the user station and transmitter:
1. Plug the external power supply’s 2.5mm connector into the DC power jack on the
rear of the user station and transmitter.
2. Connect the detachable IEC power cord to the power supply.
3. Plug the IEC power cord into an appropriate wall outlet.
Networked installation
The following instructions will enable you to install your user station and transmitter in a
networked configuration. In this installation, multiple transmitters and user stations are
attached via the same Ethernet network. In this case, it is important for each unit to be
configured with a unique IP address.
NOTE:
In Desktop and Extender modes, DTX5001-R and DTX5002-R user stations and DTX5001-T and
DTX5002-T transmitters can obtain their IP address data from a DHCP server.
Transmitters and user stations may be configured for use on a single subnet or for use
across routers. Use of routers, however, will cause a slight increase in end-to-end
latencies, which may not be acceptable for all applications.
Figure 3-8. Networked Installation
Table 3.8 Descriptions of Figure 3-8
Number Description
1
DTX5002-T
transmitter
2 Remote Workstation
3 IP Network
1
3
4
2
5