Black Box ServSwitch DTX5000, Руководство пользователя

Страница: 38 / 98

SERVSWITCH DTX 5000/5001/5002 USER GUIDE
26
Figure 3-4. Networked Installation
The DTX5000-R user station has been preconfigured with factory-default network
settings. If you install only one DTX5000-R user station and one DTX5000-T transmitter
on a subnet, you do not need to change these default network settings. If you install
multiple units on the same subnet, you will need to assign a unique IP address to each unit
or configure them for DHCP. This can be done via the serial port and must be carried out
before displaying multiple devices on the same network. See Chapter 3 for more
information.
NOTE:
The DHCP server must be configured to assign IP addresses to the user station that do not expire. Do not
change the mode to DHCP unless the equipment is connected to a DHCP server.
Table 3.4 Descriptions of Figure 3-4
Number Description
1 Remote Workstation
2 DTX5000-T transmitter
3 IP Network
4
DTX5000-R User
Station
5 UTP Cable
2
4
1
3
5