Black Box ServSwitch DTX5000, Руководство пользователя

Страница: 60 / 98

SERVSWITCH DTX5000/5001/5002 USER GUIDE
48
2. Press
Enter
. The Receiver Network Configuration Menu will appear.
Figure 4-17. Receiver Network Configuration Menu (Extender and Matrix Mode)
NOTE:
The Receiver Network Configuration Menu is identical in both Extender and Matrix modes.
NOTE:
The reset option in the Receiver Network Configuration Menu applies only to network settings.
3. Press
1
to select the Receiver IP Address option and press
Enter
.
4. Type a valid IP address. Press
Enter
to return to the Receiver Network Configuration
Menu.
5. Press 2 to select the Receiver Netmask option and press Enter.
6. Type a valid Receiver Netmask. Press Enter to return to the Receiver Network Con-
figuration Menu.
7. Press
3
to select the Receiver Default Gateway option and press
Enter
.
8. Type a valid Receiver Default Gateway. Press
Enter
to return to the Receiver Net-
work Configuration Menu.
9. Press
5
to select the Static/DHCP Network Configuration option to toggle between
Static and DHCP mode. Press
Enter
10. Type
0
(zero) and press
Enter
to return to the Network Configuration Menu. If you
made a mistake and do not wish to save the changes you made to the network set-
tings, type
C
and press
Enter
.
NOTE:
Changes to network configurations are applied only after you exit the Network Configuration Menu.
The DTX user station will now automatically reset to apply the new network
configuration. During reset, the DTX user station will drop its connection to the
transmitter. You will be returned to the Appliance Selection Menu screen. The connection
will be restored.
To access the Network Speed Menu:
1. Press 6 to select the Network Speed option in the Receiver Network Configuration
Menu.