Table 4-10 (continued). Ports 25
--
26.
Parameter Description
Vendor OUI
Displays the Manufacturer's OUI code that’s assigned by IEEE.
Vendor Name
Displays the module manufacturer’s company name.
Vendor P/N
Displays the manufacturer’s switch’s part number.
Vendor Rev (Revision)
Displays the module revision.
Vendor SN (Serial Number)
Shows the manufacturer-assigned serial number.
Date Code
Shows the date this SFP module was made.
Temperature
Shows the SFP module’s current temperature.
Vcc
Shows the SFP module’s working DC voltage.
Mon1 (Bias) mA
Shows the SFP module’s bias current.
Mon2 (TX PWR)
Shows the SFP module’s transmit power.
Mon3 (RX PWR)
Shows the SFP module’s receiver power.
Close button
Click on this button to close the window.
4.3.2 C
ONFIGURATION
Use the Configuration menu to change each port’s setting. To get to this screen, click on Config in the Port
menu. In this menu, you can set/reset the following functions. All are described in detail in Table 4-11.
Table 4-11. Configuration screen options.
Parameter Description
State
From the drop-down menu, set the port’s communication capability
to Enabled or Disabled. When enabled, traffic can be transmitted
and received via this port. When disabled, the port is blocked and no
traffic can be transferred through this port. Port State is configurable
by the user. If you set a port’s state to Disable, then that port is
prohibited from passing any traffic.
Default: Enable.
CHAPTER 4: Web-Based Management
43
