BK Precision 844USB, Руководство пользователя

Страница: 84 / 137

Following table describes buffer to device and device to buffer data transfer
Split type
Device Buffer Address assignment
None Device[ADDR] Buffer[ADDR]
Even Device[ADDR] Buffer[2*ADDR]
Odd Device[ADDR] Buffer[1+(2*ADDR)]
1./4 Device[ADDR] Buffer[4*ADDR]
2./4 Device[ADDR] Buffer[1+(4*ADDR)]
3./4 Device[ADDR] Buffer[2+(4*ADDR)]
4./4 Device[ADDR] Buffer[3+(4*ADDR)]
Real addressing will be following: (all addresses are hexadecimal)
Split type
Device addresses Buffer addresses
None 00 01 02 03 04 05 00 01 02 03 04 05
Even 00 01 02 03 04 05 00 02 04 06 08 0A
Odd 00 01 02 03 04 05 01 03 05 07 09 0B
1./4 00 01 02 03 04 05 00 04 08 0C 10 14
2./4 00 01 02 03 04 05 01 05 09 0D 11 15
3./4 00 01 02 03 04 05 02 06 0A 0E 12 16
4./4 00 01 02 03 04 05 03 07 0B 0F 13 17
Terms explanation:
Access to device address ADDR is written as Device[ADDR].
Access to buffer address ADDR is written as Buffer[ADDR].
ADDR value can be from zero to device size (in bytes).
All addresses are byte oriented addresses.
group
Insertion test:
insertion test (default ENABLE)
If enabled, the programmer checks all pins of the programmed chip, if have proper
connection to the ZIF socket (continuity test). The programmer is able to identify the wrong
contact, misinserted chip and also (partially) backinserted chip.
check ID bytes (default ENABLE)
If enabled, the programmer checks the electronic ID of the programmed chip.
Note 1 : Some old chips don't carry electronic ID.
Note 2: In some special cases, several microcontrollers don't provide ID, if copy protection
feature in the chip is set, even if device ID check setting in control program is set to "Enable".
group
Command execution:
blank check before programming
(default DISABLE)
erase before programming (default DISABLE)
verify after reading (default ENABLE)
verify (ONCE, TWICE)
verify options (nominal VCC +/-5%
nominal VCC +/-10%
VCCmin - VCCmax)
group
ISP Target Supply Parameters
84