BK Precision 844USB, Руководство пользователя

Страница: 110 / 137

Example:
A file contents data by Motorola S - format. A data block started at address FFFF0H. It is a S2
format with length of address array of 3 bytes. For all data reading you can set a value of
negative offset to FFFF0H. It means, that the offset will be subtracted from current real
addresses and so data will be written from buffer address 0.
Warning: The value of negative offset is subtracted from real address and therefore a result
of subtraction can be negative number. Because take care of correct setting of this value.
Language
This page allows you to select another language for user interface such as menu, buttons,
dialogs, information and messages. It also allows to select wished help file in another
language. For another language support of user interface the language definition file is
required.
Sound
Sound page allows user to select the sound mode of program. Program generates sounds
after some activities, e.g. activities on device (programming, verifying, reading, etc.). Program
generates sound also when warning or error message is displayed. User can now select
sound from Windows system sound (required installed sound card), PC speaker or none
sound.
In the panel
Programmer internal speaker sound settings is possible to set sound options
for some programmers with built-in internal speaker. Sound beeps are then generated from
internal programmer speaker after each device operation for indicating device operation
result – good or bad result.
Log file
This options associates with using of Log window . All reports for Log window can be written
into the Log file too. The Log file name is "Report.rep" as default. The control program creates
this file with name and directory specified in
Log file name edit box.
Following Log file options are available:
•
No default, content of Log window is not copied to Log file, i.e. all reports will be
displayed to Log window only
•
New deletes old Log file and creates new one during each start of control program
•
Append adds Log window reports into existing Log file, If file does not exist, the new file
will be created
Checkbox
Add date information to Log file name allows user to set date information into
Log file name specified by user in Log file name edit box. When the checkbox is checked,
program automatically adds current date string into user specified Log file name by the
following rules:
If user specified log file name has format:
<user_log_file_name>.<log_file_extension>
The name with added date will be:
<user_log_file_name><-yyyy-mmm-dd>.<log_file_extension>
The new part representing of date consists of yyyy - year, mmm - month and dd - day.
Example: User specifies Log file name: c:\logs\myfile.log
110