Page 109 of 191
800581-2.11 NeurOne System User Manual.doc
On the right side of the tab is the Montage definition of selected Montage. It contains
the following the fields:
Curve Number
– Draw order of curve.
Active Source Name
– The active sensor of the sensor pair. This definition must
match with the Name of the input in Protocol with which this Montage will be used.
Reference Source Name
– The reference sensor of the sensor pair. This definition
must match with the available reference names in Protocol with which this Montage will
be used.
Name
– Channel name (as seen in the monitor views).
Side
– Side information (optional).
Min. Y Value
– Minimum of Y-scale of the draw area.
Max. Y Value
– Maximum of Y-scale of the draw area.
Auto-Align
– If checked the curve will be forced to stay on the drawing area by
changing the Y
–scaling but keeping the user defined range (= Max. Y – Min. Y).
Inverted Y-axis
– If checked the channel is drawn inverted.
Notch
– If checked this channel will be notch filtered while drawing.
Display Filter
– If other than None this channel will be filtered by selected display filter.
User can now select any filter in montage editors, and it's up to the
user to ensure a filter with the same name exists for all necessary
sampling frequencies.
Color
– The default drawing color for the channel (can be changed during monitoring)
Line Width
– Curve width (in pixels)
Add channel (curve) to the selected Montage. The button is active, when
Montage is selected on the list of Montages.
Remove the selected channels from selected Montage.
Add several channels to the selected Montage.
Create new Montage using selected channels.
