Bistos BT-720, Руководство по эксплуатации

Страница: 30 / 38

BT-720 Operation manual
P/N:720-ENG-OPM-ENG-R03 Bistos Co., Ltd. 2020.10
29

Environment and power meet the requirements.

Device and accessories have no mechanical damage.

The power supply has no wear, and the insulation is good.

Specified accessories are used.

Alarm system is functioning correctly.

Battery performance meets the requirements.

Monitoring functions are in good working condition.

Ground impedance and leakage current meet the requirements.
If the instrument function has any sign of damage, do not use this monitor for any patient monitoring.
Please contact the hospital's professional maintenance personnel or our customer service personnel.
All checks that require disassembling the instrument must be performed by qualified service personnel.
Safety and maintenance checks may also be carried out by the Company's personnel.
11.2 Maintenance plan
The following tasks can only be done by qualified service personnel of Bistos. When the following
maintenance is needed, please contact your service representative. Before testing or maintenance,
clean and disinfect the device.
Inspection / Maintenance Item Frequency
Check the safety according to IEC
60601-1
At least once every two years, after replacing the
power supply or the monitor falls down.
Check all monitoring or measuring
functions not listed
At least once every two years, or when you suspect
that the measured value is not accurate.
NIBP leakage test
At least once every two years, or follow hospital
regulations
NIBP calibration
At least once every two years, or follow hospital
regulations
12 Accessories
WARNING
•
Use the accessories specified in this manual. Using other accessories may damage the
monitor, or cannot reach the safety and performance claimed in this manual.
•
The operating and storage environment of the monitor should meet the requirements of
the accessories. Please refer to the manual of the accessories for these requirements.
•
Disposable accessories can only be used once, because repeated use can cause
performance degradation.
•
If the packaging or accessories have any sign of damage, do not use such accessories.
•
For SpO
2
Sensor and Blood Pressure Cuff, the normal life time is two years. Please
replace in time.
Standard accessories are as follows:
No. Description QTY Type-number
1 Adult Finger Clip SpO
2
Sensor 1
Manufacturer:
Unimed Medical Supplies,Inc
2 SpO2 extension cable U403-01
3 Power Adapter 1
Manufacturer:
DONGGUAN SHILONG GUHUA ELECTRONIC
CO., LTD
UE36LCP1-150240SPA