Bistos BT-550 Скачать руководство пользователя страница 47

Страница: 47 / 58

BT-550 Operation manual

P/N : 550-ENG-OPM-EUR-R01

Bistos Co., Ltd.

2018.03

Placing infant and moving BT-550

3.1 Placing infant

(1) Pre-warm infant warmer.

(2) Place the infant in the center of mattress.

(3) Attach the skin temperature sensor to the appropriate part such as abdomen with adhesive

tape.

(4) Select the operating mode and set the desired temperature or heater output according to the

selected mode.

WARNING



Pre-warm the infant before placing infant in the infant warmer under the direction

of qualified medical personnel who are familiar with currently known risks and

benefits of infant warmer use.



Do not leave an infant unattended under the infant warmer.

3.2 Move the BT-550

3.2.1 Precautions

(1) Check whether an infant placed in the infant warmer mattress.

(2) Disconnect all cables from stand and remove unused accessories.

(3) For the height adjustable stand, adjust the height to lowest position.

(4) Place the power cord on the device to protect.

WARNING



Never move the infant warmer while an infant is placed.



Push or pull to the direction along the longitudinal of stand to prevent

overbalancing.



The infant warmer should be carried by two persons.

Содержание BT-550



























































Результаты поиска

Содержание BT-550

Отзывы:

Похожие инструкции для BT-550

Бренды по названию

Популярные бренды

Bistos BT-550, Руководство по эксплуатации

Результаты поиска

Содержание BT-550

Отзывы:

Похожие инструкции для BT-550

Бренды по названию

Популярные бренды