Bistos BT-550 Скачать руководство пользователя страница 5

Страница: 5 / 58

BT-550 Operation manual

P/N : 550-ENG-OPM-EUR-R01

Bistos Co., Ltd.

2018.03

Safety information

Before using BT-550 Infant warmer, read this entire manual and be fully understood the following

safety information to prevent injury of patient and user.

Symbols Used

The following symbols identify all instructions that are important to safety. Failure to follow these

instructions can lead to injury or damage to the infant warmer. When used in conjunction with the

following words, the symbols indicate:

WARNING

Can lead to serious injury or death.

CAUTION

Can lead to minor injury

The following symbols are placed on product, label, packaging and this manual in order to stand for

the information about:

Used to identify safety information.

Be well-known this information thoroughly before using BT-550.

During the operation, do not disconnect any cable.

Indicate the warning for hot surface.

IPX0

IPX0 Non-protected against ingress of water with harmful effects.

IPX1

IPX1 Protected against the vertically dripping water

(Skin temperature sensor_2EA)

IPX2

IPX2 Protected against the dripping water

(SpO

sensor)

IPX6

IPX6 Protected against the powerful jetting

(Foot switch_2EA)

Refer to operation manual. Read manual before placing the device.

Indicates the weight limit

This symbol indicates the manufacturer.

This symbol indicates the serial number of the device.

This symbol indicates the authorized representative in the European

Community of manufacturer.

This symbol indicates a type BF applied part.

This symbol indicates to keep the device dry.

This symbol indicates the device is fragile.

Содержание BT-550



























































Результаты поиска

Содержание BT-550

Отзывы:

Похожие инструкции для BT-550

Бренды по названию

Популярные бренды

Bistos BT-550, Руководство по эксплуатации

Результаты поиска

Содержание BT-550

Отзывы:

Похожие инструкции для BT-550

Бренды по названию

Популярные бренды