BIRO AFMG-52, Руководство по эксплуатации и обслуживанию

Страница: 8 / 32

OPERATION
• NEVER Place Hands into Machine Input or Output Openings.
• ONLY Properly Trained Personnel Should Use This Equipment.
• NEVER Open Machine During Operation.
• NEVER Operate Machine With Product Mixer Safety Cover Opened or Removed or Magnetic
Interlock Switch By-Passed.
• ALWAYS Turn Off and Unplug Machine from Power Source and Perform Lockout/Tagout
Procedure to This Machine
Before
Attempting to Unjam, Unclog, Cleaning or Servicing.
• NEVER Operate Without All Warning Labels Attached and Owner/Operator Manual Available to
the Operator.
• DO NOT Wear Gloves While Operating.
• DO NOT Tamper With, Bypass, Alter, or Modify This Equipment in Any Way From Its Original Condition.
• NEVER Leave Machine Unattended While the Grinder is Running.
A. TO PROCESS PRODUCT
1. Before starting the mixer grinder, have a container for receiving ground product at the output end of the
grinding bowl.
2. FIRST GRIND
3. SECOND GRIND
4. Unplug machine from power source and perform lockout/tagout procedures.
a. Fill Product Hopper (Maximum 200 Pounds), close Product Mixer Safety Cover.
b. Push the mix green start button only. During this mix operation seasonings may be added through the
sight holes in the Product Mixer Safety Cover.
c. After the desired mix, push the green grind start button to operate grinding auger and grind out product.
c. Push both grind and mix red stop buttons when all product has been ground out.
a. Fill Product Hopper (Maximum 200 Pounds), close Product Mixer Safety Cover.
d. Push both grind and mix red stop buttons when all product has been ground out.
ROTATING GRINDING AUGER & ROTATING MIXING PADDLE
TO AVOID SERIOUS PERSONAL INJURY
6
b. Push both grind and mix green start buttons to feed first grind. It is recommended to use a breaker plate
with a ⅜” diameter or larger holes.