background image

30

LIMITED WARRANTY

WARRANTY: 

 The BIRO Manufacturing Company warrants that the BIRO AFMG-52 Mixer Grinder/Chopper 

will be free from defects in material and workmanship under normal use and with recommended service. BIRO 

will replace defective parts, which are covered by this limited warranty, provided that the defective parts are 

authorized for return, shipping charges prepaid, to a designated factory for inspection and/or testing. 

DURATION OF WARRANTY: 

T

he warranty period for all parts covered by this limited warranty is one (1) 

year from date of Inspection/Demonstration as advised on the returned Warranty Registration card, or eighteen 

(18) months from original factory shipping date, whichever date occurs first, except as noted below. 

PARTS NOT COVERED BY WARRANTY: 

The following are 

not 

covered by this limited warranty: 

wearable parts in the grinding system such as the bowl, bowl pin, ring, worm, drive shaft, knife drive pin, plate 

and knife. This limited warranty does not apply to machines sold as used, rebuilt, modified, or altered from the 

original construction in which the machine was shipped from the factory. Water contaminated electrical systems 

are not covered under this limited warranty. BIRO is not responsible for electrical connection of equipment, ad-

justments to switch components or any other electrical requirements, which must be performed only by a certi-

fied electrician. BIRO is not responsible for service charges or labor required to replace any part covered by this 

limited warranty or for any damages resulting from misuse, abuse, lack of proper or recommended service.

EXCLUSION OF WARRANTIES AND LIMITATION OF REMEDIES: 

BIRO gives no warranties other 

than those expressly stated in this limited warranty. THE IMPLIED WARRANTY OF MERCHANTABILITY, 

THE IMPLIED WARRANTY OF FITNESS FOR PROCESSING OF FOOD PRODUCTS, AND ALL OTHER 

IMPLIED WARRANTIES ARE SPECIFICALLY EXCLUDED. BIRO IS NOT LIABLE FOR CONSEQUEN-

TIAL OR INCIDENTAL DAMAGES, EXPENSES OR LOSSES. THE REMEDIES PROVIDED IN THIS 

BIRO LIMITED WARRANTY ARE PURCHASER’S SOLE AND EXCLUSIVE REMEDIES AGAINST

BIRO. 

REGISTRATION CARDS: 

You must sign, date and complete the warranty registration card supplied with 

each machine. The warranty card must be returned to The Biro Manufacturing Company for proper registration. 

If no warranty card is returned to BIRO, the warranty period will begin from the date the machine was 

originally shipped from the factory. 

HOW TO GET SERVICE:

1. Contact the entity from whom you purchased the machine; or

2. Consult the yellow pages of the phone directory for the nearest authorized dealer; or

3. Contact Biro Mfg. Company for the authorized service entity in your area.

 BIRO MANUFACTURING COMPANY

1114 W. Main St.

Marblehead, OH  43440  U.S.A.

Ph:  419-798-4451      

Fax:  419-798-9106

[email protected]

 www.birosaw.com

Item No. 57037

Form No. AFMG52-232-6-17-18 B

Содержание AFMG-52

































Отзывы: