biozoom VITALITY CHECK MSRRS SCN05, Руководство пользователя

Страница: 21 / 23

biozoom copyright© 2021
21
5
blinking
Phone/tablet is connected with
the scanner. Scanner requests
you to place the hand on the
sensor area Scanner is requesting to place the ball of the
thumb on the sensor. The first symbol of the
progress indicator is blinking and LEDs on the
sensor area are flashing orange.
6
flickering
Scanner is measuring You have placed your hand on the sensor area
after the request of the scanner and the sensor
has detected the placement.
Measurement has been started. The number of
green symbols indicate the progress. Any time a
data package is sent to the phone/tablet the
WiFi indicator will flicker.
Do not move your hand now.
7
flickering
Scanner is measuring
You have placed your hand on the sensor area
after the request of the scanner and the sensor
has detected the placement.
Measurement is running. The numbers of the
green symbols indicate the progress. Any time a
data package is sent to the phone/tablet the
WIFI indicator will flickering.
Do not move your hand now.
8 Scanner has finished the
measurement The measurement has been finished.
9
blinking
Scanner has finished the
measurement. Scanner
requests you to take your hand
off the sensor The measurement has been finished and you
have still placed your hand on the sensor. By
blinking of the smallest symbol, the scanner
requests you to take off your hand. If you do not
do it data will not be send to the server for
calculation.
Please take off your hand from the scanner now.
10
each symbol is repeatedly
switched on one after the
other.
Firmware update mode Update mode has been started.
13 Maintenance and Cleaning
The V I T A L I T Y C H E C K needs no regular maintenance and has no user-maintainable parts.
To ensure consistent measurement quality, a regular cleaning is recommended. Please use a slightly
damp, soft cleaning cloth.
Never use paint thinner, benzene, alcohol, disinfectants or sanitizers, or other strong cleaning agents
when cleaning the V I T A L I T Y C H E C K , as these could damage the case and the optical surface of the
sensor.
If needed the sensor surface can be disinfected by wiping it with a cloth with 70% isopropanol.