biozoom copyright© 2021
9
10
Steps for Performing a Measurement
The V I T A L I T Y C H E C K
scanner is a sophisticated device, which takes over 1000 measurement points
per single measurement. The calculation of the result needs significant computing power, which cannot
be done on the scanner itself. Therefore, the app sends the encrypted data via internet to a central server
for calculation of the result. The calculated result is transferred to the app the same way. Typically, the
phone/tablet will automatically choose an internet connection. It may use an existing WIFI network or a
cellular connection to send the data to the server.
For the communication between scanner and phone/tablet the scanner opens a WIFI hotspot. The
phone/tablet must use a WIFI connection to the hotspot to receive the measured data from the scanner.
Since a phone/tablet can handle only one WIFI connection at the same time the app may need to change
the WIFI connection between connecting to the scanner and connecting to the internet several times.
The connection data are stored in the app, so changing from the scanner WIFI to the WIFI used to connect
your phone to the internet does not require you to enter passwords or network names. But depending
on the version of operating system you will be asked for permission (iPhones and Android 10 and newer
phones typically ask for permission, older phones may not).
If you have established the communication between scanner and phone/tablet once, you can conduct
measurements without going through the connection procedure again. If you always use the same
scanner, you only need to open the app, switch on the scanner, and press the NUTRITION button in the
app.
The connection procedure between scanner and phone/tablet is described below. Please read the manual
of your phone/tablet if you do not know how to connect it with the internet.
10.1 How to Connect Scanner with Phone/Tablet
The connecting operation is easy and supported by the V I T A L I T Y C H E C K
app. Switch your
phone/tablet on. When opening the app, the first time
a “Setup wizard” is opened automatically
(If you
want to run the setup wizard again, you can find it in the main menu). Please follow the instructions step
by step until you can select and start a measurement.
The following screen shots concerns only to the connection procedure
of the “Setup wizard”
. Starting a
measurement procedure is descripted in chapter 10.2.
The image of “Step 1”
(see below) is displayed on the phone/tablet when the V I T A L I T Y C H E C K
app is
opened the first time after downloading. The other steps follow in the pictured order one by one. The app
will request you to switch the scanner on (step 7) and to enter the name of the scanners WIFI by scanning
the QR-Code of the scanners serial number (see backside of the scanner) or by typing in the serial number
manually (step 10 or step 10.1). When connecting a scanner to a phone/tablet the app will download a
firmware update automatically if necessary (step 11
–
step 14).
Some of the steps are alternative steps and are displayed only when necessary. The connection process
is fast and simple and must furthermore be performed only once if you always use the same scanner.
Содержание VITALITY CHECK MSRRS SCN05
Страница 1: ...User Manual...
