22
Biotage
®
Selekt Enkel User Manual | © Biotage 2022
Data Administration
Data Administration
Note:
Only users with system owner privilege can administrate
column types, solvents, rack types, and user accounts.
Administrate Column Types
The software comes with a preconfigured list of column types
and their settings. To add, edit, and delete user-defined column
types, press
Menu
,
Data Administration
and then
Column
Administration
(see Figure 46).
Figure 46.
The Column Administration view.
Column Parameters
Warning
»
Always use Biotage Safety Valve (P/N 417115SP) when
processing columns or combinations (e.g. column and dry
load vessel) with a total CV larger than 0.8 L.
»
Never use columns or combinations with a total CV larger
than 3.1 L.
»
Never exceed the maximum pressure or flow rate for the column.
Note:
The preconfigured Biotage column types cannot be edited
or deleted. We recommend that you disable
Visible
for any
column that will not be used.
»
Visible:
If enabled, the column type is available for use.
»
Name:
The name of the column type.
»
Column Volume:
The column volume (CV) in mL.
»
Default Flow Rate:
The default flow rate in mL/min.
»
Max Pressure:
The safety pressure in bar or psi
(see page 24). If reached, the flow rate will be
reduced to keep the pressure at this level.
»
Equilibration Pressure:
The maximum pressure during the
equilibration, in bar or psi (see page 24). If reached, the
flow rate will be reduced to keep the pressure at this level.
»
Equil./Equilibration Length:
The equilibration length in CV.
»
Equilibration Flow Rate:
The equilibration
flow rate in mL/min.
»
Air Flush Length:
The air flush length in CV.
This value will be used as the default volume
for the air flush feature (see page 21).
»
Load Capacity at ΔCV=2:
The approximate
load capacity when delta CV is 2.
»
Chemistry Type:
The type of chromatography the
column is used for, normal or reversed phase.
»
Part Number:
The manufacturer’s part number.
Administrate Solvents
The software comes with a preconfigured list of solvents
and their settings. To add, edit, and delete user-defined
solvents, press
Menu
,
Data Administration
and then
Solvent
Administration
(see Figure 47).
Figure 47.
The Solvent Administration view.
Solvent Parameters
Note:
The preconfigured Biotage solvents cannot be edited or
deleted. We recommend that you disable
Visible
for any solvent
that will not be used.
»
Visible:
If enabled, the solvent is available for use.
»
Name:
The solvent name.
»
Strength:
The solvent strength value,
a value between 0 and 1.
1,2
Содержание Selekt Enkel
Страница 1: ...Biotage Selekt Enkel User Manual...
Страница 42: ...40 Biotage Selekt Enkel User Manual Biotage 2022 Notes Notes...
Страница 43: ......
