Biontech BTM-505N, Руководство по эксплуатации

Страница: 20 / 36

20
Do not disconnect the electric plug.
(When the plug is disconnected, the system can be restored when the reset button is pushed)
How to replace the filter
1.Open the cover and remove the filter. (Picutre1~3)
Be careful of the possible water coming out of the filter. (It is not leakage)
2.Replace with a new filter. (Picture 4)
Should remove the sealing sticker of the filter.
Check whether the O-ring is attached well at the bottom of the new filter first. Then, place the filter
into the hole securely and turn it clockwise to insert it into the connection part. If a unbranded filter
is installed, there will be a voice guidance saying
Filter rejected, mount correct one. , and the
power will be turned off after 20 seconds.
3.Let the water flow through after selecting the purified water function.
Let the water flow through for about 2~3 minutes.
(Dusts of activated carbon which is the filtering medium may flow mixed together with water during
the initial flow after the filter is replaced.)
Check whether there is any water leakage at the installation section of the filter.
4. Push the reset button. (Picture 5)
Check whether the filter usage status indicating number becomes. [000]
5. Close the cover. (Picture 6)
Items that require your understanding
.
When you get the alkaline ionized water in a cup after the filter is replaced, there can be
white bubbles.. That is not abnormal.
The ion concentration (pH value) can become slightly higher after the filter is replaced (For
about 1 week). That is not abnormal.
Follow the steps mentioned above even when replacing the filter earlier than the time for
the replacement.
The filter without our company logo is not a genuine product. When a genuine filter is not used, the quality
cannot be guaranteed and the normal after sales service(A/S) will not be available.
(Picutre 1) (Picutre 2)
(Picutre 3)
(Picutre 4) (Picutre 5)
(Picutre 6)