Biontech BTM-505N, Руководство по эксплуатации

Страница: 9 / 36

9
How to install
1. Wall mounted water tap
Caution
Check whether the components to be installed at the water tap are appropriate.
Should use the standard hose (1/4"), supplied by the company for the connection.
Use the one- touch adapter to fasten the hose before fixing the safety pin as illustrated in Page 3.
- If the standard hose is not used, damage due to water pressure can be caused, possibly leading
to water leakage
Do not connect the product to a warm water pipe.
- Degradation of purification capacity and malfunctioning can be caused.
1. Disconnect the water tap from the water pipe.
2. Rotating the adapter into the water pipe. (Single-water tap)
3. Assemble the water tap back into the adapter. (Single-water tap)
4. Install the standard compliant adapter Included (Select between large and medium, small, 3/8” )
between the water pipe and the water branch pipe. Then install the adapter which needs to be
connected to the water ionizer to the cold water pipe, while connecting the balancing adapter to the
warm water pipe. (Water taps for cold and warm water)
5. Place the rubber gaskets between the water pipes, water tap, and adapter, and should apply the
Teflon tape to the connection parts to assemble them.
6. Insert the inlet hose into the one-touch fitting installed to the adapter and then fasten the safety pin.
7. Adjust the water pressure control screw to a appropriate level.
(Alkaline water flow standard: 1.5 0.5 /min)
Should use the standard inlet hose (1/4") and fix the valve cover in the direction of the hose to prevent
the hose from being bent or the fastening nut from being loosened.