Biontech BTM-505N, Руководство по эксплуатации

Страница: 29 / 36

29
Symptoms Causes and actions
The outflow water volume is low or there is no
outflow.
The life span of the filter can be shortened when
it is blocked due to the sever pollution of the source
water.
The water becomes warm when it flows through the
main frame.
The pH of the acidic water is indicated as neutral.
Water leaks from the bottom of the main body.
No water comes out of the acidic water outlet while
[Alkaline] or [Strong Alkaline] is used.
Is the life span of the filter overdue?
(Need to check the filter usage status number)
=> Replace the filter.
Is the filter wrongly fixed?
=> Fix it right.
Is the water supply suspended?
=> Wait until the water supply is resumed.
Is the hose bent or crushed?
=> Set it right.
When the water flows through initially, the
water can become warm due to the room
temperature or the heat inside the main
body.
=> Not malfunctioning. Use the water after let the
water flow through.
For about one week after the new filter is
installed, the pH value of the acidic water
may not fall into the range of the
colorimetry
(Due to the effect of the activated carbon)
=> Not malfunctioning. Check again one
week later.
If the pH value of the acidic water is 6.5,
the value may be not compatible with the
samples of the pH measurement sheet.
Dew condensation can occur inside the
main body due to the conditions of temperature
and moisture.
=> Not malfunctioning.
If the situation is not temporary and the
water leakage volume is high, then it
means the system is malfunctioning.
=> Contact for requesting after sales service.
Is the acidic water drainage hose bent or
crushed?
(The water may not taste good)
=> Set it right