Bionet BM3VET Touch, Руководство пользователя

Страница: 16 / 194

Rev. 1.1 1.BASIC 16
BM3VET Touch User’s Manual
NOTES
Power Requirements
Before connecting the device to the power line, check that the voltage and frequency ratings of the
power line are the same as those indicated on the unit’s label. If this is not the case, do not connect
the s ystem to the power line until you adjust the un it to m atch the power source.
In U.S.A, if the installation of this equipment will use 240V rather than 120V, the source must
be a center-tapped, 240V, single-phase circuit.
Restricted Sale
U.S.A federal law restricts this device to sale by or on the order of a licensed veterinarian..
Supervised Use
This equipment is intended for use under the direct supervision of trained veterinary personnel in
veterinary centers. The device is restricted to be used on one patient at a time.
Ventilation Requirements
Set up the device in a location which affords sufficient ventilation. The ventilation openings of the
device must not be obstructed. The ambient conditions specified in the technical specifications must
be ensured at all times.
·Put the monitor in a location where you can easily see the screen and access the operating controls.
·This product is protected against the effects of cardiac defibrillator discharges to ensure proper
recovery, as required by test standards. (the screen may blank during a defibrillator discharge but
recovers within second as required by test standards.)
Reference Literature
Medical Device Directive 93/42/EEC
EN 60601-1/1990 +A1: 1993 +A2 : 1995 : Medical electrical equipment.
General requirements for safety
EN 60601-1-1/9. 1994 +A1 12.95: General requirements for safety.