BIOLABO Diagnostics KENZA 240 TX, Руководство пользователя, Страница: 46 / 56

6.5.3 Manage reagents
The instrument has to check that the reagents are present, and the volumes are sufficient for the run.
Two options are available.
•
You can ask an automatic check of the volumes by
volumes of the selected tests
corresponding to each test in the “Vol.” col
•
You can enter manually the volumes by selecting a test
and clicking on . The following popup appears:
Enter the reagent volume pr
tank, and click “OK”.
N
N
o
o
t
t
e
e
: you may have to select R1 or R2 for Bi
6.5.4 Start the run
Once the tests are selected and the volumes are checked, you can :
•
Start only calibrations by clicking on
controls requested and stop the work. The patient list is saved but not performed.
•
Start Calibrations and Patients by clicking
analyses for the selected tests will be performed.
N
N
o
o
t
t
e
e
: The instrument can start only if all the reagent volumes for selected tests are ok. In
reagent is not available, you have to unselect it
Manage reagents
The instrument has to check that the reagents are present, and the volumes are sufficient for the run.
You can ask an automatic check of the volumes by clicking on . The instrument will check the
selected tests if the volume are not yet available. It will then
corresponding to each test in the “Vol.” column. A “<” indicates that the volume is insufficient.
You can enter manually the volumes by selecting a test
. The following popup appears:
Enter the reagent volume present in the corresponding
: you may have to select R1 or R2 for Bi-reagent tests.
Start the run
Once the tests are selected and the volumes are checked, you can :
Start only calibrations by clicking on . The instrument will carry out the calibrations and
controls requested and stop the work. The patient list is saved but not performed.
Start Calibrations and Patients by clicking on . All calibrations, controls and patients
analyses for the selected tests will be performed.
he instrument can start only if all the reagent volumes for selected tests are ok. In
reagent is not available, you have to unselect it before starting the run.
- 46 -
The instrument has to check that the reagents are present, and the volumes are sufficient for the run.
. The instrument will check the
if the volume are not yet available. It will then display the volume
umn. A “<” indicates that the volume is insufficient.
out the calibrations and
controls requested and stop the work. The patient list is saved but not performed.
. All calibrations, controls and patients
he instrument can start only if all the reagent volumes for selected tests are ok. In the case where a