BIOLABO Diagnostics KENZA 240 TX, Руководство пользователя, Страница: 21 / 56

- 21 -
S S e e c c o o n n d d p p a a g g e e o o f f p p a a r r a a m m e e t t e e r r s s : :
Parameter Description Allowed value
Sample volume Defines the sample volume (µL) 2-100 (step 1)
Water volume Defines the water volume to be added to the
reaction mixture (µL) 0-300(step 1)
Sample washing Defines the number of washes to be performed by
the sampling system after having sampled this test. 1-3
No. of Reag. Defines the number of reagents used for this test. 1-2
MultiPoint Defines if the calibration is performed with several
calibration points. 1 (Yes) or 0 (No)
STD number
Defines the standard position which shall be used to
calibrate the test. The standard positions can be
shown by clicking on the button “View STD
positions”.
1-8
Reag. 1 Vol. Defines reagent 1 volume (µL) 2-350 (step 1)
Reag. 1 Pos. Defines reagent 1 position. (Refer to “0
Quick selection of reagent position”, page - 25 -)
1-60
Vial R1. Defines the type of container for reagent 1. A: container of 40mL (medium, internal)
B: container of 17mL (small, external)
C: container of 60mL (large)
Reag. 2 Vol. Defines reagent 2 volume. 2-350 (µL)
Reag. 2 Pos. Defines reagent 2 position. (Refer to “0
Quick selection of reagent position”, page - 25 -)
1-60
Vial R2. Defines the type of container for reagent 2. A: container of 40mL (medium, internal)
B: container of 17mL (small, external)
C: container of 60mL (large)
STD Conc. Concentration of standards.
Concentration. In case of multi-standard
calibration, the position 1 is reserved for
concentration 0.