BIOLABO Diagnostics KENZA 240 TX Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 56

BIOLABO Diagnostics KENZA 240 TX Скачать руководство пользователя страница 36

5.6.1 Check control values

To check the control values for a test, select it and click on

Enter the period you want:

The control values and statistics will be displayed for this period.

•

You can choose different controls, and link C1 and C3 or C2 and C4.

Click on

to select controls C5 to C10

•

Select the lot number if needed. Default is

Click on a control value to see the date of the control.

N

N

o

o

t

t

e

e

: The graph can be used to check the

statistics.

Check control values

To check the control values for a test, select it and click on

.

The control values and statistics will be displayed for this period.

You can choose different controls, and link C1 and C3 or C2 and C4.

to select controls C5 to C10

Select the lot number if needed. Default is the chart for all lot numbers.

Click on a control value to see the date of the control.

: The graph can be used to check the Westgard rules. You need at least 20 values to have significant

- 36 -

estgard rules. You need at least 20 values to have significant

«
...
34
35
36
37
38
...
»

Содержание KENZA 240 TX

























































Отзывы:

Нет отзывов