BIOLABO Diagnostics KENZA 240 TX, Руководство пользователя, Страница: 16 / 56

3.6 Switching off the instrument
To switch off the instrument, follow the following procedure :
•
From the main menu, close the software using the cross button
•
Switch off the instrument using the switch located in the right of the back panel.
N N o o t t e e
: The reagents cooling module remains on even when the instrument is off. To totally switch of the
instrument, you must unplug it.
N
N
o
o
t
t
e
e
: The ISE module has to be permanently on. It remains on even when the instrument is off. To avoid
damaging the ISE module, do not unplug the instrument.
3.7 Main menu and sub-menus
In the Main menu the user can have a general look of the status of instruments, including a graphic
representation of the reagents and samples tray.
On the lower part of the screen there are the different command keys which are used to enter the other menus
and functions of the instrument. The following keys are available:
(Start) Gives access to the start menu where sample analysis and test
calibration functions can be performed as stand alone or together.
(Methods) Accesses functions related to Methods data handling and to the
programming, calibration, etc.
(Predilutions) Gives access to the menu allowing sample predilution. A
sample can be diluted once with a dilution ratio selected by the operator or in a scale
with dilution ratio 2, 4, 8, 16, 32.
(Patients) Accesses the functions related to the data handling of the
patients, such as Enter Patients & Req
(Service) Accesses functions related to the diagnostic menu and to the
different electronic and mechanical set up needed for servicing the instrument.
(CK Cuvettes) Accesses the fu
the reading of all the cuvettes with all wavelengths.
(Washing) Accesses the standard maintenance functions related to the washing of the
reading cuvette.
(ISE Module) Access to the ISE
instrument
switch off the instrument, follow the following procedure :
From the main menu, close the software using the cross button
Switch off the instrument using the switch located in the right of the back panel.
: The reagents cooling module remains on even when the instrument is off. To totally switch of the
: The ISE module has to be permanently on. It remains on even when the instrument is off. To avoid
le, do not unplug the instrument.
menus
In the Main menu the user can have a general look of the status of instruments, including a graphic
representation of the reagents and samples tray.
een there are the different command keys which are used to enter the other menus
and functions of the instrument. The following keys are available:
Gives access to the start menu where sample analysis and test
nctions can be performed as stand alone or together.
Accesses functions related to Methods data handling and to the
programming, calibration, etc.
) Gives access to the menu allowing sample predilution. A
sample can be diluted once with a dilution ratio selected by the operator or in a scale
with dilution ratio 2, 4, 8, 16, 32.
) Accesses the functions related to the data handling of the
patients, such as Enter Patients & Requests, Print Report, Patients Lists and so on.
) Accesses functions related to the diagnostic menu and to the
different electronic and mechanical set up needed for servicing the instrument.
) Accesses the function for checking of the reading cuvettes, performing
the reading of all the cuvettes with all wavelengths.
) Accesses the standard maintenance functions related to the washing of the
) Access to the ISE Module functions.
- 16 -
Switch off the instrument using the switch located in the right of the back panel.
: The reagents cooling module remains on even when the instrument is off. To totally switch of the
: The ISE module has to be permanently on. It remains on even when the instrument is off. To avoid
In the Main menu the user can have a general look of the status of instruments, including a graphic
een there are the different command keys which are used to enter the other menus
Gives access to the start menu where sample analysis and test
Accesses functions related to Methods data handling and to the
) Gives access to the menu allowing sample predilution. A
sample can be diluted once with a dilution ratio selected by the operator or in a scale
) Accesses the functions related to the data handling of the
uests, Print Report, Patients Lists and so on.
) Accesses functions related to the diagnostic menu and to the
different electronic and mechanical set up needed for servicing the instrument.
nction for checking of the reading cuvettes, performing
) Accesses the standard maintenance functions related to the washing of the