Caution
All bintec elmeg devices are delivered with the same username and password. As long
as the password remains unchanged, they are therefore not protected against unau-
thorised use. How to change the passwords is described in
Passwords
on page 58.
Make sure you change the passwords to prevent unauthorised access to your device!
If you have forgotten your password, you must reset your device to the ex works state,
which means your configuration will be lost.
5.2.2 Logging in for Configuration
Set up a connection to the device. The access options are described in
Access Options
on
page 31.
GUI (Graphical User Interface)
Log in via the HTML surface as follows:
(1)
Enter your user name in the User field of the input window.
(2)
Enter your password in the Password field of the input window and confirm with Re-
turn or click the Login button.
The status page of the GUI opens in the browser.
SNMP shell
Log into the SNMP shell as follows:
(1)
Enter your user name e.g.
%!
, and confirm with Return.
(2)
Enter your user password, e.g.
%!
, and confirm with Return.
Your device logs in with the input prompt, e.g.
&6)
. The login was successful. You are
now in the SNMP shell.
To leave the SNMP shell after completing the configuration, enter
1
and press Return.
5.3 Configuration options
This chapter first offers an overview of the various tools you can use for configuration of
your device.
bintec elmeg GmbH
5 Access and configuration
bintec RS Series
37