BinTec elmeg CS410, Руководство по эксплуатации

Страница: 74 / 152

Start as fol lows:
a
M s s
Acous tic Ack. to nes
The cross next to a soft key in di ca tes which set ting is cur rent ly ac ti vat ed.
s
Press the soft key for the cho sen functi on:
»
No
«: Ac knowledgment to ne ne ver ac ti ve.
»
Yes
«: Ac knowledgment to ne al ways ac ti ve.
»
on ly er ror ton
«: Ac knowledgment to ne for in cor rect entry
active.
Acknowledge signal
active?
No
ok
Only error tn
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Setting call waiting
If you have en ab led call wai ting for your sys tem te le pho ne (see page 70), you can set the call wai ting tone vo lu me. You
can also choo se whet her a call wai ting is sig nal led once or se ve ral times.
Start as fol lows:
a
M s s
Acous tic Call wait.
s
The cross next to »
re pe at
« shows that a call wai ting is sig nal led
se ve ral ti mes.
If you press the soft key again, a call wai ting is on ly sig nal led on ce.
The chec kmark next to »
re pe at
« is deleted.
Call wait. tone
Volume
repeat
s
Press the »
Vo lu me
« soft key.
O
Press the ar row keys to set the call wai ting to ne vo lu me. The bar
in the dis play shows the cur rent sta tus.
Con firm your en tries with
O
.
Call wait. tone {}
vol.
- ©©©-- +
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Idle
At ten ti on tone vo lu me for the »Do not dis turb« functi on
You can set va ri ous op tions of the »Do not dis turb« functi on on your sys tem te le pho ne (see page 42). If in co ming
calls are sig nal led with an at ten ti on tone when the »Do not dis turb« functi on is en ab led, you can set the vo lu me of this
tone.
Start as fol lows:
a
M s s
Acous tic Quiet
O
Press the ar row keys to set the vo lu me. The bar in the dis play
shows the cur rent sta tus.
Con firm your en tries with
O
.
Idle tone volume {}
- ©©©-- +
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Con fi gu ring and set ting the sys tem te le pho ne Acoustic
68