BinTec BIANCA/BRICK-XL2, Начало работы

Страница: 33 / 36

C
ONFIGURATION
27
fer network. In the Partner / Interface field select the part-
ner name the default route leads to. For our example we
added a default route without a transfer network to part-
nerbrick via ISDN. (See the following page).
Then select [ SAVE ]. Return to the main menu by se-
lecting [ EXIT ] twice. Your configuration is almost com-
plete. Now proceed to the next section Saving your Config-
uration .
Saving your Configuration
Once you have finished configuring either your ISDN di-
alup or leased line, select [
Exit ] from the main menu.
For an initial configuration you should select [ Save as
boot configuration and exit ]. Your initial configuration is
now complete and is saved in a flash ROM file named
“boot”. You are then returned to the BRICK’s SNMP shell
prompt.
The configuration file saved as “boot” will be used upon
each new system start.
BIANCA/BRICK-XL2 Setup Tool BinTec Communications AG
[ IP ][ ROUTING ][ ADD ] : Configure IP Routes mybrick
Route Type Default route
Network WAN without transit network
Partner / Interface Leased, Slot 2 (0)
Metric 1
SAVE CANCEL
Use <Space> to select
☞