BinTec BIANCA/BRICK-XL2, Начало работы

Страница: 11 / 36

I
NSTALLING THE
BRICK
5
Incorrect cabling of the LAN and ISDN interfaces could
damage your router. Don´t interchange the LAN and
ISDN interfaces. Only connect the LAN interface of your
router with the LAN interface of your PC/hub. Only con-
nect the ISDN interface of your router with your ISDN
outlet.
All the examples in this documentation are for a BRICK-
XL2 with a Fast Ethernet adapter (CM-100BT) and two
ISDN adapters (CM-2BRI and CM-EBRI).
Note that the BRICK-XL2 does not have a power switch.
The system will power up as soon as it is connected to
1. Or, if installing the BRICK-XL2 in a 19” rack, first attach the included
mounting brackets. Additionally, do not affix the rubber feet if rack
mounting the BRICK.
!
!
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ + + + + + +
+
Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7
115/230 V~
60/50 Hz
6/3 A
Serial Nr.:
BIANCA/BRICK-XL2
Central Site Router
BinTec
Communications
CE 0188 X
GS
115/230 V~
60/50 Hz
6/3 A
Step 1
Connect the included laplink
cable to your terminal or
computer and the 9 pin serial
port of your BRICK-XL2.
Step 2
Connect the 100Base-TX
port of your CM-100BT to
your ethernet using Cate-
gory 5 Shielded Twisted
Pair cable.
Step 4
Connect the included power
cord to the BRICK-XL2 and
your local power supply.
Step 3
Connect the included ISDN
cable (RJ-45) to your BRICK-
XL2’s ISDN port(s) and your
ISDN outlet.
!