BinTec BIANCA/BRICK-XL2, Начало работы

Страница: 29 / 36

C
ONFIGURATION
23
ing a transfer network, enter the IP Network address and
netmask
1
for your WAN Partner.
Select [ SAVE ] twice, and then [ EXIT ] to return to Setup
Tool’s main menu.
IP Configuration
From the main menu select [ IP ]. From the submenus
which are displayed select [ Routing ] . This menu displays
a list of routes known to the BRICK. Initially, the list will
be empty. Select [
ADD ] to create a new default route. Your
display will be similar to the menu shown below.
In the Route Type field, select “Default route ”.
In the Network field select the appropriate entry (using
the spacebar) to specify whether the default route should
be over the LAN or WAN. For WAN routes, select the ap-
propriate entry depending on whether you are using a
transfer network.
In the Partner / Interface field select the partner name
the default route leads to. For our example, we added a
1. If you are using a standard netmask (e.g. 255.255.255.0), you can
leave this field empty.
BIANCA/BRICK-XL2 Setup Tool BinTec Communications AG
[WAN][ADD][IP]: IP Configuration (partnerbrick) mybrick
IP Transit Network no
Partner’s LAN IP Address 200.1.1.0
Partner’s LAN Netmask 255.255.255.0
SAVE CANCEL
Enter IP address (a.b.c.d or resolvable hostname)