BinTec BIANCA/BRICK-XL2, Начало работы

Страница: 22 / 36

BIANCA/BRICK-XL2
16
BRICK’s hostname and PPP ID. With the exception of the
admin , read , and write Password/Community fields, the
other fields are not required and can be edited later. The
SNMP Community fields define the passwords that are
required for logging into your BRICK via the network.
You can, of course, enter the same name in both fields. In
our example both
System Name and Local PPP ID are set
to brick (see page 10).
Select [ SAVE ] to accept the entries and return to the
main menu.
Setting up the LAN Interface
Select [ CM-100BT, Fast Ethernet ] to configure your ether-
net interface. In the following menu you will need to enter
the IP address, local netmask
1
, and type of encapsulation
to use on your BRICK. For now, you can select Ethernet II
encapsulation.
☞
1. If you are using a standard netmask (e.g. 255.255.255.0), you can
leave this field empty.