BinTec BIANCA/BRICK-XL2, Начало работы

Страница: 30 / 36

BIANCA/BRICK-XL2
24
default route without a transfer network to partnerbrick
via ISDN.
Then select [ SAVE ] and then [ EXIT ] until you return
to the main menu.
Your configuration is almost complete. Now proceed
to the section Saving your Configuration on page 27.
Leased Line
If you connected your BRICK to an ISDN leased line, the
WAN Interface submenu will appear similar to the fol-
lowing except that the
ISDN Switch Type field will display
“autodetect on bootup” and each of the channel fields will
be set as “dialup” channels.
To configure the BRICK’s ISDN interface for use with
a leased line you will need to set the ISDN Switch Type,
and D and B channel fields manually.
Scroll through the entries in the ISDN Switch Type field
and select the entry for the number or channels your ISDN
line uses. Upon exiting this field the cursor will jump to
the first channel used. For each channel used, specify
which mode the channel should operate in.
BIANCA/BRICK-XL2 Setup Tool BinTec Communications AG
[IP][ROUTING][ADD]: Confuigure IP Routes mybrick
Route Type Default route
Network WAN without transit network
Partner / Interface partnerbrick
Metric 1
SAVE CANCEL
Use <Space> to select