BinTec BIANCA/BRICK-XL2, Начало работы

Страница: 25 / 36

C
ONFIGURATION
19
tion just keeps running, you may have to select the appro-
priate ISDN protocol manually by scrolling through the
entries in the
ISDN Switch Type field using the spacebar or
the left and right arrow keys.
Leaving the Switch Type setting to “autodetect on
bootup” usually allows the BRICK to automatically detect
the proper ISDN protocol each time the system boots.
To ensure data transfers are possible over ISDN, verify
that the autoconfiguration is correct or set your ISDN
switch type appropriately.
Once the switch type and channel fields are correct se-
lect [ Incoming Call Answering > ].
Incoming Call Answering
In this menu you will specify how your BRICK responds
to incoming ISDN calls and which services it will support.
To enable routing (i.e. to allow IP connections via
ISDN calls), use [ ADD ] to create a new entry and select
PPP (routing) in the Item field (using the spacebar). Then
enter one of your BRICK’s ISDN numbers (or an EAZ) in
the
Number field.
!
BIANCA/BRICK-XL2 Setup Tool BinTec Communications AG
[ SLOT 2 UNIT 0 ISDN BRI ][ INCOMING ] : Incoming Call Answering mybrick
Item Number Mode Username
ADD DELETE EXIT